comports

README.md

@@ -27,12 +27,14 @@
 - [ ] Übertragung Rundumleuchten Signal an Start
 - [x] Luftdrucksensor für Höhe und Vario
 
-### Aufbau
+## Aufbau
 
 Pin Layout Heltec WiFi LoRa (v3)
+
 ![Heltec WiFi LoRa (v3)](https://heltec.org/wp-content/uploads/2023/09/pin.png)
 
 
+### Anschlusszuordnung
 | Heltec WiFi LoRa (v3) Pin | MP1584 |SG90 Pin | BMP180 Pin |  MS4525 Pin | LED Ring Pin |
 | --- | --- | --- | --- | --- | --- |
 | GND  | OUT -| GND | GND | GND | GND |

platformio.ini

@@ -9,8 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-build_cache_dir=./.pio/.build_cache
-cache_dir=./.pio/.cache_dir
+build_cache_dir = ./.pio/.build_cache
+cache_dir = ./.pio/.cache_dir
 
 [common]
 platform = espressif32
@@ -28,34 +28,35 @@ build_flags =
 lib_deps = 
 	olikraus/U8g2@^2.36.15
 	jgromes/RadioLib@^7.4.0
+	bblanchon/ArduinoJson@^7.4.2
 monitor_speed = 115200
 extra_scripts = pre:extra_script.py
 
 [env:heltec_wifi_lora_32_V3_sailplane]
 extends = common
 board = heltec_wifi_lora_32_V3
-lib_deps = ${common.lib_deps}
+lib_deps = 
+	${common.lib_deps}
 	bolderflight/Bolder Flight Systems MS4525@^1.1.3
 	bolderflight/Bolder Flight Systems Unit Conversions@^5.0.0
 	bolderflight/Bolder Flight Systems Airdata Calculations@^4.0.0
 	adafruit/Adafruit BMP085 Library @ ^1.2.4
-lib_ignore =
+lib_ignore = 
 	winde
-
-
 build_flags = ${common.build_flags}
 	-D DEVICE_SAILPLANE
-
-
+upload_port = COM8
+monitor_port = COM8
 [env:heltec_wifi_lora_32_V3_winde]
 extends = common
 board = heltec_wifi_lora_32_V3
-lib_deps = ${common.lib_deps}
+lib_deps = 
+	${common.lib_deps}
 	adafruit/Adafruit NeoPixel@^1.15.2
-	madhephaestus/ESP32Servo@^3.0.9
-
-lib_ignore =
+	madhephaestus/ESP32Servo@^3.0.9	
+lib_ignore = 
 	sailplane
 build_flags = ${common.build_flags}
 	-D DEVICE_WINDE
-
+upload_port = COM9
+monitor_port = COM9

src/main.cpp

@@ -2,13 +2,14 @@
 #include <Arduino.h>
 #include <U8g2lib.h>
 #include <RadioLib.h>
-
+#include <ArduinoJson.h>
 #ifdef DEVICE_WINDE
 #include <tacho.h>
 #endif
 
 #ifdef DEVICE_SAILPLANE
 #include <airspeed.h>
+JsonDocument sailplane_data;
 #endif
 
 SX1262 radio = new Module(LORA_NSS, LORA_DIO1, LORA_NRST, LORA_BUSY);
@@ -89,6 +90,37 @@ void setup()
   u8g2.sendBuffer();
 }
 
+void draw_rssi(int Rssi){
+    u8g2.drawFrame(102,8,4,3);
+    u8g2.drawFrame(107,6,4,5);
+    u8g2.drawFrame(112,4,4,7);
+    u8g2.drawFrame(117,2,4,9);
+    u8g2.drawFrame(122,0,4,11);
+
+    if ((Rssi > -120) && Rssi < 0 )
+      {
+       u8g2.drawBox(102,8,4,3); 
+      }
+
+    if ((Rssi > -100) && Rssi < 0 )
+      {
+       u8g2.drawBox(107,6,4,5); 
+      }
+    if ((Rssi > -85) && Rssi < 0 )
+      {
+       u8g2.drawBox(112,4,4,7); 
+      }
+    if ((Rssi > -70) && Rssi < 0 )
+      {
+       u8g2.drawBox(117,2,4,9); 
+      }
+    if ((Rssi > -55) && Rssi < 0 )
+      {
+       u8g2.drawBox(122,0,4,11); 
+     }
+
+  
+}
 void loop()
 {
 #ifdef DEVICE_SAILPLANE
@@ -102,8 +134,14 @@ void loop()
   u8g2.print(vel_kmh);
   u8g2.sendBuffer();
   if (vel_kmh > 30)
-  {
-    String data = String(vel_kmh);
+  { 
+    sailplane_data["from"]= "D-1234";
+    sailplane_data["telemetry"]["speed"]=vel_kmh;
+    sailplane_data["telemetry"]["min"]=70;
+    sailplane_data["telemetry"]["max"]=150;
+    String data;
+    serializeJson(sailplane_data,data);
+    //String data = String(vel_kmh);
     int state = radio.transmit(data);
     if (state == RADIOLIB_ERR_NONE)
     {
@@ -157,6 +195,8 @@ void loop()
     // you can read received data as an Arduino String
     String str;
     int state = radio.readData(str);
+    JsonDocument received;
+    deserializeJson(received,str);
 
     // you can also read received data as byte array
     /*
@@ -166,16 +206,28 @@ void loop()
     */
 
     if (state == RADIOLIB_ERR_NONE)
-    {
+    { 
+      String data_from=received["from"];
+      int data_speed=received["telemetry"]["speed"];
+      int data_min=received["telemetry"]["min"];
+      int data_max=received["telemetry"]["max"];
       // packet was successfully received
       u8g2.clearBuffer();
-      u8g2.setFont(u8g2_font_logisoso42_tr);
-      u8g2.setCursor(0, 60);
-      u8g2.print(str);
+      u8g2.setFont(u8g2_font_ncenB10_tr);
+      u8g2.setCursor(0, 10);
+      u8g2.print(data_from);
+      u8g2.setCursor(0, 64);
+      u8g2.print(data_min);
+      u8g2.setCursor(64, 64);
+      u8g2.print(data_max);
+      u8g2.setFont(u8g2_font_logisoso32_tr);
+      u8g2.setCursor(0, 50);
+      u8g2.print(data_speed);
+      draw_rssi(radio.getRSSI());
       u8g2.sendBuffer();
       Serial.println(str);
       int speed = str.toInt();
-      set_tacho(speed, 70, 150);
+      set_tacho(data_speed, data_min, data_max);
     }
   }
 #endif